Program:
Nyelv:

Boulanger & Idriss (2014) - CPT

The method determines the cyclic resistance of soil to liquefaction based on the results of the Cone Penetration Test (CPT). The basic parameter is the normalized cone tip resistance qc1N.

where:

The fines content FC [%] can either be entered directly in the Soil panel or calculated from the results of the CPT test.

For a reference earthquake with a magnitude of MS = 7.5 and an effective stress of 1 atm (100 kPa), the cyclic resistance is calculated using the following equation:

The resulting cyclic resistance CRR at the given depth is obtained by multiplying the reference resistance by the correction factors:

where:

and where:

where:

σ´v0

-

effective vertical stress in depth

Pa

-

reference atmospheric pressure ( 100 kPa )

qc

-

cone tip resistance [kPa]

MS

-

earthquake magnitude

Sources:

Boulanger, R. W., & Idriss, I. M. (2014). CPT and SPT Based Liquefaction Triggering Procedures. Report No. UCD/CGM-14/01, Center for Geotechnical Modeling, University of California, Davis.

Próbálja ki a GEO5 szoftvert.
Ingyenesen!